My stack

    MadMapper

    MadMapper does real-time video mapping onto physical surfaces and projections, with DMX lighting control integration.

    Visit website
    ToolTrim verdict3.4/ 5Average

    A rental license covering roughly 11 months (44 euros/month) costs about as much as the 479-euro perpetual license, which also covers 2 seats.

    MadMapper, preview 1
    About

    In practice. What you can do with MadMapper.

    MadMapper maps video in real time onto physical surfaces for projection and LED installations, with DMX lighting control integration for combined video and lighting shows. It runs on macOS and Windows, though it is not designed to run inside a Windows virtual machine.

    A free demo lets you evaluate the software with a watermark, disabled project saving and cropped features. A rental license costs 44 euros/month for one computer, while a perpetual license is 479 euros one-time but requires a minimum of 2 seats. It fits a visual or creative technologist producing live projection mapping who needs both video and lighting control in one tool.

    Practical uses

    • TestTry MadMapper's projection mapping features on the watermarked demo before buying a license for a live show.
    • PerformRun a live projection and DMX lighting show on a rental license for a single event without a permanent purchase.

    Features & use cases

    Effets visuels
    Animation
    Temps reel

    Pros and cons. What MadMapper does well, and what to expect.

    Pros

    • Combines real-time video mapping and DMX lighting control in a single tool.
    • Rental license offers a lower-commitment way to cover a single event or show.
    • Free demo lets you test the workflow before paying.

    Cons

    • Perpetual license requires a minimum of 2 seats, raising the effective entry cost for a solo user.
    • Free demo cannot save or load projects, limiting it to short evaluation sessions.

    When it makes sense. Keep MadMapper, or challenge it?

    Keep if

    • You produce live projection mapping or LED installations and need combined video and DMX lighting control.
    MadMapper becomes worthwhile when
    • You use it at least once a week
    • The monthly cost (€44) is small next to the time it saves you

    Challenge if

    • You only need occasional mapping for one event and don't want the 2-seat minimum of the perpetual license.
    MadMapper becomes too expensive when
    • You use it less than once a month
    • A simple free version or a tool already in your stack would do

    Pricing. What does MadMapper cost ?

    Free

    $0

    Permanent free plan

    • Watermarked output, no project save/load, no export, limited features; evaluation only.

    Rental license

    ToolTrim reference price

    €44/mo

    Per user.

    • Time-limited license for a single computer; identical feature set to the perpetual license.

    Perpetual license

    €479

    Lifetime license, one-time payment. Per user, 2 minimum.

    • Minimum 2 seats (includes an extra backup seat for hardware failure during live performances).

    Official pricingChecked on September 25, 2026

    MadMapper's billing traps

    Before you pay

    The perpetual license is sold as a bundle of a minimum 2 seats, not a single-seat purchase, which affects the real per-seat cost.

    Alternatives. What could replace MadMapper?

    Current

    Direct substitutes

    Our verdict. What to know about MadMapper.

    Why this verdict

    Average

    Added value

    A rental license at 44 euros/month covers a single event without a permanent purchase, but the perpetual license's 2-seat minimum raises the effective entry cost.

    Simplicity

    Real-time surface mapping requires some setup and familiarity with projection/DMX workflows before a usable result.

    Fit for purpose

    Delivers real-time video mapping and DMX lighting integration as promised for projection and LED installations.

    Performance

    Combines video mapping and DMX lighting control in one tool, covering both projection and lighting needs for live shows.

    Reversibility

    Neutral score: project export and portability outside MadMapper are not covered by the collected sources.

    MadMapper Summary

    Category
    content creation tool.
    Price from
    €44/mo (Rental license).
    Best for
    A visual/creative technologist producing live projection mapping or LED installations who needs real-time surface mapping software.
    Avoid if
    You only need occasional mapping for one event and don't want the 2-seat minimum of the perpetual license.
    Alternatives
    TouchDesigner.
    ToolTrim verdict
    A rental license covering roughly 11 months (44 euros/month) costs about as much as the 479-euro perpetual license, which also covers 2 seats.

    Frequently asked questions.

    What to know before choosing MadMapper.

    What is MadMapper used for?

    MadMapper does real-time video mapping onto physical surfaces and projections, with DMX lighting control integration.

    How much does MadMapper cost?

    MadMapper costs €44/month (Rental license plan). Price verified on 2026-09-25.

    Is MadMapper suitable for beginners?

    A visual/creative technologist producing live projection mapping or LED installations who needs real-time surface mapping software.

    Is MadMapper worth the price?

    A rental license covering roughly 11 months (44 euros/month) costs about as much as the 479-euro perpetual license, which also covers 2 seats.

    What are the best alternatives to MadMapper?

    The main alternatives to MadMapper are: TouchDesigner. Free alternatives: TouchDesigner.

    MadMapperFrom €44/mo
    Visit

    What’s next?